|
Testometric also produce a range of product/industry specific
testing machines. Utilising proven design methodologies,
we can provide cost effective testers for the range of product
listed below. Contact
Testometric Sales if you require more information. |
 |
|
| AT/CT Box-C Box Compression Testing Machine |
| |
The Testometric model AT BOX-C has been specially developed to carry out compression tests on large boxes up to 1 metre cube and 25kN capacity. The machine not only gives the true strength of a box, it can be used to determine the effect of cyclic loading and carry out long term static tests to assess the effect of stacking loads.
|
| 50AT/CT Box-C Box Compression Testing
Machine |
| |
The Testometric model 50AT BOX-C has been specially developed to carry out compression tests on large boxes up to 1 metre cube and 50kN capacity. The machine not only gives the true strength of a box, it can be used to determine the effect of cyclic loading and carry out long term static tests to assess the effect of stacking loads.
|
| AT-CB Chair Base Testing Machine |
| |
The AT-CB is a special wide frame version of the M500-50AT machine. It has been specially adapted to simulate the loading requirements of swivel chair bases. Bases are tested in compression mode either to destruction, or at a constant or cyclic load to asses the performance under differing conditions. |
| AT-Long Long Frame Testing Machine |
| |
Testometric produce extended frame versions of their AT and CT universal strength testing machine. Depending on the application and length of frame required we can position the control console accordingly to maintain correct working height. Contact Testometric sales for more information. |
| AT-LST Large Sheet Testing Machine |
| |
Testing machine dedicated to 3 point bend tests on corrugated roofing material and other similar large sheet material. |
| AT-WT Wide Throat Foam/Seat Testing Machine |
| |
A special wide frame machine for testing foam and seating. Used extensively in the automotive seat and furniture industry. The machine has special internal software for conducting multiple stage cyclic and indentation hardness testing.
|
| AT-S Spring Testing Machine |
| |
The Testometric AT-S models are a range of dedicated spring testers based on the AT Universal testing machines. They have internal capacity to store controlled test methods for several thousand spring types. |
| M500-ATMS Multi
Station Testing Machine |
| |
A second test station can be added to all FS models, this is situated at the side of the main loading frame and can be fitted with load cells up to a maximum capacity of 25kN. The system is ideal where both high and relatively low strength materials need to be tested in that the correct load cells and grips are always fitted ready for testing.
|
| M250-FTCT Testing Machine |
|
The M250-FT CT is a precision low capacity computer controlled testing machine. Its main areas of application include fibre testing, electronic components, circuit boards, small components etc. |
| Horizontal Testing System |
| |
Testometric can supply versions of their AT & CT machines suitable for testing in a horizontal mode. Applications usually involve specimens where long lengths need to be tested such as control cables, rope, cord, electrical cables etc. Machines are available with frames capable of testing specimens up to 20 metres long.
|
| |
|
|
